Techniques for improving LDPC codes performance

Abstract

Low Density Parity Check (LDPC) codes are considered to be one of the best classes of error-correcting codes. This thesis deals with two major issues in LDPC codes: decoder design to enhance error correction performance and efficient decoder implementation. Five techniques have been introduced in this thesis. First, an efficient platform for LDPC code design and performance evaluation is developed. This platform implements parallel simulation algorithms to efficiently evaluate the performance of the proposed algorithms for LDPC decoders and code design. Second, an innovative technique is introduced to improve the performance of LDPC decoding in the error-floor region. Special structures in the code graph, called trapping sets, are considered to be the major source of decoding errors in the error-floor region. The proposed technique is based on eliminating the negative effect of trapping sets during LDPC decoding. As a third contribution, a novel approach to improve the decoder performance and/or throughput is introduced. This approach is based on utilizing LDPC decoder idle times by introducing two queues: one at the decoder input and the other at the decoder output. This architecture enables the decoder to run extra iterations beyond the conventional maximum allowable iterations. The fourth proposed technique reduces the bit error rate of LDPC decoders. This technique is based on tracking the number of failed parity check equations in the intermediate decoding iterations, rather than only relying on the final decoder output (after reaching the maximum number of iterations). The last proposed technique deals with the construction of interconnect efficient fully-parallel LDPC codes with high error correction performance. Fully-parallel implementation is very hard due to the complexity of processing elements interconnections. The proposed technique is based on constructing LDPC codes with less complex interconnections and with low impact on the error correction performance. This goal is achieved by putting a constraint on the maximum connection length between any two processing elements.