Development of Robots and Algorithms for Cooperative Additive Manufacturing

dc.contributor.advisorBartolo, Paulo
dc.contributor.advisorCangelosi, Angelo
dc.contributor.authorAlhijaily, Abdullah
dc.date.accessioned2024-04-23T10:05:29Z
dc.date.available2024-04-23T10:05:29Z
dc.date.issued2024-04-11
dc.description.abstractAdditive manufacturing (AM) is dominated by single robots which present limitations in fabrication time and efficiency of the system. To address this problem, this research explores the concept of cooperative printing in which multiple printheads fabricate the same part concurrently. However, configurations for cooperative printing in the literature present several limitations such as reduced cooperative printing area and cross prevention in which no two printheads are allowed to cross each other's paths during printing. Thus, a novel configuration is proposed in this research. This configuration was realised on a custom gantry machine. As shown, the proposed configuration allows printing parts that are impossible to print or inefficiently printed by other cooperative printing configurations. Furthermore, several novel algorithms are formulated and implemented in the developed machine. Additionally, efficient algorithms were developed for path planning that allowed to reduce the computation time of slicing for cooperative printing from minutes to milliseconds. Also, the proposed system significantly increased the printing speed surpassing the maximum printing time reduction reported in the literature. Conversely, mobile robots are promising for AM due to their large workspace. However, current plastic AM by mobile robots produce parts with poor quality and rough surface finish. Thus, an accurate mobile robot specialised for mobile AM is developed for this research. The proposed mobile robot's accuracy and precision were assessed and was found to have a 0.37 mm average error surpassing the literature on mobile AM. Finally, it was shown that the developed mobile robot surpasses them both in terms of quality and accuracy. For gantry systems, offline path planning is reliable and efficient due to their high accuracy and predictability. However, it is unreliable for low accuracy and error-prone systems such as mobile robots. To overcome this, an online cooperative printing path planning designed for the developed mobile robot is proposed. Several novel real time algorithms were developed, including a novel online collision avoidance algorithm that guaranteed collision-free motions. This research stands as the first work to develop fully online path planning for cooperative printing.
dc.format.extent222
dc.identifier.urihttps://hdl.handle.net/20.500.14154/71862
dc.language.isoen_US
dc.publisherUniversity of Manchester
dc.subject3D printing
dc.subjectadditive manufacturing
dc.subjectmobile robot
dc.subjectcooperative printing
dc.subjectpath planning
dc.titleDevelopment of Robots and Algorithms for Cooperative Additive Manufacturing
dc.typeThesis
sdl.degree.departmentMechanical, Aerospace & Civil Engineering
sdl.degree.disciplineMechanical Engineering
sdl.degree.grantorUniversity of Manchester
sdl.degree.nameDoctor of Philosophy

Files

Copyright owned by the Saudi Digital Library (SDL) © 2024